Dating fender bassman head

This bushing slides over the pot shaft before the knob is installed, and stabilizes the shaft as well as keeping the knob from rubbing the front faceplate. Used as the 'Fat' switch push switch in the Blues Junior. Has slight "raised" bump near the center of the handle. 6.5 inches from mounting center to mounting center. Chrome end hooks - replacement for vintage and modern Fender amps. Fits the Fender Hot Rod Deluxe, Hot Rod Deville, Blues Deluxe, Blues Junior and Blues Deville, 59 Bassman reissue, as well as the original Tweed amps from the 1950s: Tweed Vibrolux, Tweed Twin, Tweed Tremolux, Tweed Super, Tweed Pro, Tweed Princeton, Tweed Harvard, Tweed Deluxe, Tweed Champ, and Tweed Bassman. Fits the Fender Hot Rod Deluxe, Hot Rod Deville, Blues Deluxe, Blues Junior, Pro Junior, and Blues Deville, 59 Bassman reissue. This set of four bronze screws connects the speaker baffle board to the cabinet on Fender tweed combo amps from the 50s, as well as today's reissue tweed amps such as the Hot Rod Deluxe and 59 Bassman Reissue. For amps which require additional baffle screws, see the individual screw/nut part number SC-415, below.The tapered end of the bushing fits into the hole in the faceplate. JACK NUT AND WASHER, METAL, SWITCHCRAFT Genuine Switchcraft nut and washer set for the blackface/silverface Fender bias pot, Mesa Boogie pots, and the CTS or Alpha pots with 3/8" bushing (found on original vintage Fender blackface and silverface), as well as Peavey and Switchcraft 1/4" jacks. SWITCH, TOGGLE - MADE BY CARLING - RATED AT 15A, 125VAC. Comes complete with two nickel-plated handle mounts and four screws with T-nuts. Black amplifier handle with vinyl sleeve over steel strap and one-screw mounting nickel-plated end caps. SPEAKER BAFFLE MOUNTING BRONZE SCREW AND STAINLESS STEEL KEPS NUT FOR Fender TWEED AMPS. It was established in 1890 by Victor Carroll Squier in Battle Creek, Michigan. By 1975, Squier became defunct as a manufacturer and a brand name for strings, as Fender opted to market its strings under the Fender brand name. Squier Company manufactured strings for violins, banjos, and guitars. Does not contain Fender logo, so it may be used on other brands of amps. Screws not included - order screw pack SC-402 separately (takes a pack of 4 screws). Pack of 6 stainless steel chassis mounting screws for Fender reissue "Tweed" series amps. SPEAKER BAFFLE MOUNTING BRONZE SCREWS AND STAINLESS STEEL KEPS NUTS (SET OF 4) FOR Fender TWEED AMPS.These screws connect the speaker baffle board to the cabinet on Fender tweed combo amps from the 50s, as well as today's reissue tweed amps such as the Hot Rod Deluxe and 59 Bassman Reissue. Fender 8 ft POWER CORD, 3-WIRE, 18ga, SJT type, .250 TAB ends.

Features 40-page color section with two-page fold out.

Black and White wires terminated in 1/4 inch push on terminals.

Green wire terminated in screw terminal for ground connection to chassis.

The knob is inserted after the bushing is in place, and hides the bushing from view. Used on later versions of the Blues Junior, and also the early version if a set-screw chicken head knob is used to replace the discontinued push-on chicken head knobs. JNUT-38 JACK NUT AND WASHER, METAL, SWITCHCRAFT, SET OF 6 Genuine Switchcraft nut and washer set for the blackface/silverface Fender bias pot, Mesa Boogie pots, and the CTS or Alpha pots with 3/8" bushing (found on original vintage Fender blackface and silverface), as well as Peavey and Switchcraft 1/4" jacks. Includes mounting hardware (two screws and T-nuts). Individual screw, bronze 6-32, 1 1/2 inches long, Phillips and matching 6-32 Keps Nut with integral washer.

Original Fender part number 003657000 (old number 036570). Has 6 electrical terminals on bottom of switch (DPDT). Button not included, see K-058 below handle strap, replacement for Fender "tweed" style amps (as well as other vintage amps). Does not contain Fender logo, so it may be used on other brands of amps. Screws not included - order screw pack SC-402 separately (takes a pack of 4 screws). Chrome end hooks - replacement for vintage and modern Fender amps. Pack of 6 stainless steel back panel screws for Fender original and reissue "Tweed" series amps. Mounts the chassis to the cabinet on top as well as the sides of the cabinet. Set of 4 screws, bronze 6-32, 1 1/2 inches long, Phillips and matching 6-32 Keps Nuts with integral washers.